|
|
Post by hydrojohn on Jan 28, 2017 5:50:38 GMT -8
I am thinking about installing a MPPT controller inside the motorhome and generate power using one or two portable panels. My question is how do I connect the panels to the controller so that they can easily be disconnected when we pack up and move?.
|
|
|
|
Post by rabird on Jan 28, 2017 9:22:59 GMT -8
"MC4" connectors is an option, they are somewhat difficult to unplug. www.renogy.com/products/components/wiring-cables-connectors/Anderson Power pole, etc The panels should come with a pos and neg wire with MC4 connectors already on it For MPPT you could connect the panels in series and then buy a length of cable with MC4 on each end. You cut the length of cable in half, plug into the panels and wire into the controller. |
|
