Post by zubenubi on Sept 5, 2017 4:56:37 GMT -8
Hi,
I added a RNG-50DB to my boat last year. It was accompanied by an 80W panel and the 2 were wired together and supplying the charge controller. At some point the junction box on the panel was 'fried'. It is a hongxinxu model pv-jb009. I havent disassembled it to date but it smells like fried electronics.
I have measured 14VDC from the panel in early morning ambient light so I am not sure what the damage truly is but Id like to repair/replace the junction box and make the panel usable again.
Any insights please?
Thanks
I added a RNG-50DB to my boat last year. It was accompanied by an 80W panel and the 2 were wired together and supplying the charge controller. At some point the junction box on the panel was 'fried'. It is a hongxinxu model pv-jb009. I havent disassembled it to date but it smells like fried electronics.
I have measured 14VDC from the panel in early morning ambient light so I am not sure what the damage truly is but Id like to repair/replace the junction box and make the panel usable again.
Any insights please?
Thanks
