|
|
Post by nitesky on Aug 11, 2016 20:53:18 GMT -8
Just received my 100W 12v with the Adventurer 30A controller.
It comes with TS-R remote temperature sensor. I see the leads to connect to the controller but scratching my head on how the tubular sensor connects to the battery. I have a sealed AGM battery. Help!!
|
|
|
|
Post by nitesky on Aug 15, 2016 17:24:28 GMT -8
So no one has mounted the remote temperature sensor that comes with the unit?
|
|
|
|
Post by spiderbob on Aug 16, 2016 6:42:09 GMT -8
Mount it anyway you like. It meaures ambient temperature. But if I were doing it, I would put it closest to the warmest battery and use that data.
|
|
|
|
Post by rex on Aug 16, 2016 7:37:08 GMT -8
Just received my 100W 12v with the Adventurer 30A controller. It comes with TS-R remote temperature sensor. I see the leads to connect to the controller but scratching my head on how the tubular sensor connects to the battery. I have a sealed AGM battery. Help!! I don't believe it connects to the battery like other do that connect to a battery screw post. I'd set in the batt box, might tape it to the side or top. |
|
|
|
Post by nitesky on Aug 18, 2016 11:52:58 GMT -8
Thanks Spiderbob and Rex. Think I'll tape it to the side of the battery.
|
|
|
|
Post by Admin on Aug 23, 2016 9:38:17 GMT -8
Like spiderbob had mentioned, It is an ambient temperature sensor it just needs to be in the vicinity of the batteries nearby.
-A.L.
|
|
|
|
Post by Brandon on Dec 12, 2016 19:22:54 GMT -8
I see that it comes with a small ring connected to a wire. Where does this ring attach to?
|
|
|
|
Post by Admin on Dec 20, 2016 16:48:42 GMT -8
I see that it comes with a small ring connected to a wire. Where does this ring attach to? Brandon, Is this with the commander controller? if it is for the commander controller there should be a ground screw the ring terminal would connect to. If you have any questions please call our techs at 800-330-8678 |
|
