gdr
New Member
Computer will not recognize rover controller?
Posts: 5 
|
Post by gdr on Jun 24, 2017 17:43:24 GMT -8
 I just purchased my first solar system, for my RV ,,And I think it is ready to go. I have a rover series controller 40amp. it came with the 400w Renogy kit. once I turned it on the red lights are blue. I cannot find any information in the manual about blue lights. I'm talking about that little LED lights that tells me if it is charging, or discharging so on and so on. can anyone explain to me what's going on is this normal is my RV going to burn down now that it is sitting in a different town and I am. I have tried tech support nobody's home. I searched the forum no one is talking about it. I searched the Internet I can't even find anything about my controller. the lights seem to be indicating proper usage if they were red instead of blue. it reads that the battery is normal with a solid blue light. a blue slow blinking lights says it is doing the initial charging. help would definitely be appreciated and the sooner the better. Like I said my RV is in the next town over from me and I do not want anything to go wrong while I'm not there. |
|
|
|
Post by rabird on Jun 24, 2017 17:54:17 GMT -8
why do think they should be red?
are you sure you are not mistaking blue for white?
|
|
gdr
New Member
Computer will not recognize rover controller?
Posts: 5
|
Post by gdr on Jun 24, 2017 18:53:59 GMT -8
it says in the manual that they are red. They are very light blue.
|
|
|
|
Post by rabird on Jun 25, 2017 1:40:59 GMT -8
|
|
gdr
New Member
Computer will not recognize rover controller?
Posts: 5
|
Post by gdr on Jun 25, 2017 5:41:16 GMT -8
I really do appreciate your help I do not know why my manual says red where this one says white. Everything else is exactly the same except for the word red versus white. All the way through the manual. I don't know where to pick up a link to this manual it is the one that came with the Kit. I also do not know how to add a photo to this sure you my manual. Sorry you've been a great help to me..I put a photo of the page were talking about as my avatar only way I can figure out how to get it on here. If you can pull it off and see it's identical except for the word red.
|
|
|
|
Post by rabird on Jun 25, 2017 6:05:34 GMT -8
srne makes a very similar product, slight color difference, the manual is .docx and does not suggest color! in any event since the led does not change color, don't worry, it is on or off. Renogy may have changed the manual. srne solar, I think you notice the similarity!, click on 'related to download' to find a link to the .docx www.srnesolar.com/index/show/id/70.html |
|
|
|
Post by WayneSallee on Jul 21, 2017 8:42:41 GMT -8
hehe yes my instructions said "red" as well, and yet the LED's are blue. They badly need to rewrite all of their instructions they have. Wayne Sallee Wayne@WayneSallee.com www.WayneSallee.com |
|
